University of Cambridge Home Department of Engineering
Mechanics, Materials, Design 		Cambridge Centre for Micromechanics
University of Cambridge > Engineering Department > MMD > CCM

Technical Report Archive

2004

  1. ZC Ou, YH Chen, TJ Lu. 'Singularities and near-tip field intensity factors of piezoelectric interface cracks'
    CUED technical report, CUED/C-MICROMECH/TR86, Jan 2004 Abstract
  2. YS Tian, TJ Lu. 'Minimum weights of compression corrugated panels'
    CUED technical report, CUED/C-MICROMECH/TR87, Jan2004 Abstract
  3. T Kim, HP Hodson, TJ Lu. 'Contribution of vortex structures and flow separation to local pressure and heat transfer characteristics in an ultralightweight lattice material'
    CUED technical report, CUED/C-MICROMECH/TR88, Feb 2004 Abstract
  4. CY Zhoa, TJ Lu, HP Hodson. 'Modeling of thermal radiation in cellular metal foams with open cells'
    CUED technical report, CUED/C-MICROMECH/TR89, Feb2004 Abstract
  5. YS Tian, TJ Lu. 'Axial load capacity of cold-formed steel wall stud with sheathing'
    CUED technical report, CUED/C-MICROMECH/TR90, Feb 2004 Abstract
  6. J Wang, TJ Lu, AG Evans. 'Sound transmission through lightweight double-leaf partitions: systematic parametric analysis and application'
    CUED technical report, CUED/C-MICROMECH/TR91, Feb 2004 Abstract
  7. Q Liu, Y-H Chen, TJ Lu. 'Microstructure in the near-tip process zone for an impermeable macrocrack in piezoelectric materials '
    CUED technical report, CUED/C-MICROMECH/TR92, Feb 2004 Abstract

2003

  1. LH Han, TJ Lu, AG Evans. 'Minimum weight design of a high authority flexural actuator based on electroelastometers'
    CUED technical report, CUED/C-MICROMECH/TR73, Nov 2003 Abstract
  2. CY Zhao, T Kim, TJ Lu, HP Hodson. 'Thermal transport in high porosity cellular metal foams'
    CUED technical report, CUED/C-MICROMECH/TR74, Feb 2003 Abstract
  3. CY Zhao, TJ Lu, HP Hodson. 'Thermal radiation in ultralight metal foams with open cells'
    CUED technical report, CUED/C-MICROMECH/TR75, April 2003 Abstract
  4. J Tian et al. 'The effects of topology upon fluid-flow and heat-transfer within cellular copper structures'
    CUED technical report, CUED/C-MICROMECH/TR76, July 2003 Abstract
  5. LH Han, TJLu, AG Evans. 'Optimal design of a lightweight shape memory alloy actuator'
    CUED technical report, CUED/C-MICROMECH/TR77, Aug 2003 Abstract
  6. F Hoffmann, TJ Lu, H Hodson. 'Heat transfer performance and pressure drop of Kagome core metal truss panels'
    CUED technical report, CUED/C-MICROMECH/TR78, Aug 2003 Abstract
  7. T Kim, HP Hodson, TJ Lu. 'Pressure loss and heat transfer mechanisms in a lattice-frame structured heat exchanger'
    CUED technical report, CUED/C-MICROMECH/TR79, Aug 2003 Abstract
  8. CY Zhao, TJ Lu, HP Hodson. 'Measurements of thermal radiation in ultralight metal foams with open cells'
    CUED technical report, CUED/C-MICROMECH/TR80, Aug 2003 Abstract
  9. AJ Fuller, T Kim, HP Hodson, TJ Lu. 'Measurement and interpretation of the heat transfer coefficients of metal foams'
    CUED technical report, CUED/C-MICROMECH/TR81, Aug 2003 Abstract
  10. J Wang, TJ Lu, J Woodhouse, RS Langley. 'Sound transmission through lightweight double-leaf partitions: theoretical modelling'
    CUED technical report, CUED/C-MICROMECH/TR82, Oct 2003 Abstract
  11. HF Zhao, GK Hu, TJ Lu. 'Correlation between the elastic moduli and conductivity of two-dimensional isotropic two-phase composites'
    CUED technical report, CUED/C-MICROMECH/TR83, Oct 2003 Abstract
  12. G Hu, X Liu, TJ Lu. 'A variational method for nonlinear micropolar composites'
    CUED technical report, CUED/C-MICROMECH/TR84, Nov 2003 Abstract
  13. D Bell, TJ Lu, NA Fleck, M Spearing. 'The selection of MEMS actuators and sensors'
    CUED technical report, CUED/C-MICROMECH/TR85, Nov 2003 Abstract

2002

  1. Lu TJ. 'Ultralight porous metals: from fundamentals to applications'
    CUED technical refort, CUED/C-MICROMECH/TR.54, February 2002. Abstract
  2. Chen Y-H, Lu TJ. 'Cracks and fracture in piezoelectrics'
    CUED technical report, CUED/C-MICROMECH/TR.55, February 2002. Abstract
  3. Deshpande VS, Fleck NA. 'Energy absoption of an egg-box material'
    CUED technical report, CUED/C-MICROMECH/TR.56, February 2002. Also submitted to J. Mech. Phys. Solids. Abstract
  4. Davy CA, Fleck NA, Bolton MD. 'The collapse behaviour of a sugar aggregate'
    CUED technical report, CUED/C-MICROMECH/TR.57, June 2002. Abstract
  5. Davy CA, Marquis D. 'Tensile failure of a tridirectional carbon-carbon composite'
    CUED technical report, CUED/C-MICROMECH/TR.58, March 2002. Abstract
  6. Davy CA, Marquis D. 'Mock-up design using Taguchi experimental strategy: towards multiaxial behaviour of a brittle orthotropic composite'
    CUED technical report, CUED/C-MICROMECH/TR.59, June 2002. Abstract
  7. Zupan MP, Ashby MF, Fleck NA. 'Actuator classification and selection - the development of a database'
    CUED technical report, CUED/C-MICROMECH/TR.60, April 2002. Abstract
  8. Sutcliffe MPF, Combarieu R, Repoux M, Montmitonnet P. 'Tribology of plane strain compression tests on aluminium strip using ToF-SIMS analysis of transfer films'
    CUED technical report, CUED/C-MICROMECH/TR.62, September 2002. Abstract
  9. Steeves CA, Fleck NA. 'Minimum weight design for the strength of sandwich panels with composite face-sheets and a polymer foam core'
    CUED technical report, CUED/C-MICROMECH/TR.63, November 2002. Abstract
  10. J Wang, YS Tian, TJ Lu, CY Barlow. 'Stress/strain distributions and role of sheathing in partition wall panels subjected to compression'
    CUED technical report, CUED/C-MICROMECH/TR67, July 2002 Abstract
  11. Y Tian et al.. 'The effects of topology upon fluid-flow and heat-transfer within cellular copper structures'
    CUED technical report, CUED/C-MICROMECH/TR68, Sept 2002 Abstract
  12. YS Tian, J Wang, TJ Lu, CY Barlow. 'An experimental study on the axial behaviour of cold-formed steel wall studs and panels'
    CUED technical report, CUED/C-MICROMECH/TR69, Oct 2002 Abstract
  13. YS Tian, TJ Lu. 'Minimum weight of cold formed steel sections under compression'
    CUED technical report, CUED/C-MICROMECH/TR70, Oct 2002 Abstract
  14. YS Tian, J Wang, TJ Lu. 'Racking strength and stiffness of cold-formed steel wall frames'
    CUED technical report, CUED/C-MICROMECH/TR71, Oct 2002 Abstract
  15. T Kim, AJ Fuller, HP Hodson, TJ Lu. 'An experimental study on thermal transport in lightweight metal foams at high reynolds numbers'
    CUED technical report, CUED/C-MICROMECH/TR72, Oct 2002 Abstract

2001

  1. Liu J-S, Lu TJ. 'Optimal design of optical fibre-holding microclips with metamorphic development'
    CUED technical report, CUED/C-MICROMECH/TR.42, 2001. Abstract
  2. Chen Y-H, Lu TJ. 'Recent developments in invariant integrals'
    CUED technical report, CUED/C-MICROMECH/TR.43, January 2001. Abstract
  3. Lu TJ, Chen C, Zhu G. 'Compressive behaviour of corrugated board panels'
    CUED technical report, CUED/C-MICROMECH/TR.44, January 2001. Abstract
  4. Lu TJ, Zhu G. 'The elastic contants of corrugated board panels'
    CUED technical report, CUED/C-MICROMECH/TR.45, January 2001. Abstract
  5. Lu, TJ, Ong, JM. 'Characterisation of close-celled cellular aluminium alloys'
    CUED technical report, CUED/C-MICROMECH/TR.46, January 2001. Abstract
  6. Lu TJ, Chen C, Zhu G. 'On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacity'
    CUED technical report, CUED/C-MICROMECH/TR.47, January 2001. Abstract
  7. TJ Lu, CG Levi, HNG Wadley & AG Evans. 'Distributed porosity as a design variable for oxide thermal barriers made by physical vapor deposition'
    CUED technical report, CUED/C-MICROMECH/TR.48, March 2001. Abstract
  8. Kim T, Zhao CY, Lu TJ, Hodson HP. 'Convective heat dissipation with lattice-frame materials'
    CUED technical report, CUED/C-MICROMECH/TR.49, July 2001. Abstract
  9. Wang J, Lu TJ, Evans J. 'Effects of stud stiffness on sound transmission loss across double-wall partition boards'
    CUED technical report, CUED/C-MICROMECH/TR.50, July 2001. Abstract
  10. Tian YS, Lu TJ, Evans J. 'Minimum weight of cold-formed steel sections under compression'
    CUED technical report, CUED/C-MICROMECH/TR.51, July 2001. Abstract
  11. Tian YS and Lu TJ. 'Optimal design of compression corrugated panels'
    CUED technical report, CUED/C-MICROMECH/TR.52, 2001. Abstract
  12. Zhao CY and Lu TJ. 'Analysis of microchannel heat sinks for electronics cooling'
    CUED technical report, CUED/C-MICROMECH/TR.53, 2001. Abstract

2000

  1. Deshpande, VS, Fleck, NA. 'High strain rate compressive behaviour of aluminium alloy foams'
    International Journal of Impact Engineering, 24(3), p 277-298, 2000. Also CUED technical report, CUED/C-MICROMECH/TR.6, 1998. Abstract
  2. Deshpande, VS, Fleck, NA. 'Isotropic constitutive models for metallic foams'
    Journal of the Mechanics and Physics of Solids, 48(6), p 1253-1283, 2000. Also CUED technical report, CUED/C-MICROMECH/TR.9, 1998. Abstract
  3. Olurin OB, Fleck NA, Ashby, MF. 'Joining of aluminium alloy foams with fasteners and adhesives'
    Journal of Materials Science, 35(5), p 1079-1085, 2000. Also CUED technical report, CUED/C-MICROMECH/TR.25(rev. of TR.19), 1999. Abstract
  4. Lu, TJ. 'Thermal management of high power electronics with phase change cooling'
    Int. J. Heat & Mass Transfer, 43(13), p 2245-2256, 2000. Also CUED technical report, CUED/C-MICROMECH/TR.26, 1999. Abstract
  5. Feih S, Shercliff HR, McGrath G. 'Design of composite adhesive joints'
    CUED technical report, CUED/C-MICROMECH/TR.31, 2000.
  6. Chen C, Fleck NA. 'A creep model for polymeric foams'
    CUED technical report, CUED/C-MICROMECH/TR.32, 2000. Abstract
  7. Chen Y-H, Lu, TJ. 'Conservation laws of the Jk - vector for microcrack damage in piezoelectric materials
    Submitted to Int. J. Solids & Structures, July 2000. Also CUED technical report, CUED/C-MICROMECH/TR.33, 2000. Abstract
  8. Gu, S, Lu, TJ, Evans, AG. 'On the design of 2-D cellular metals for combined heat dissipation and structural load capacity'
    CUED technical report, CUED/C-MICROMECH/TR.34, 2000. Abstract
  9. Shieh J, Huber JE, Fleck NA, Ashby MF. 'The selection of sensors'
    Submitted to Progress in Materials Science, Aug. 2000. Also CUED technical report, CUED/C-MICROMECH/TR.36, 2000. Abstract
  10. Deshpande VS, Ashby MF, Fleck NA. 'Foam topology: bending versus stretching dominated architectures'
    Submitted to Acta Materialia, Aug 2000. Also CUED technical report, CUED/C-MICROMECH/TR.37, 2000. Abstract
  11. Chen Y-H, Lu TJ. 'On the path dependence of the J - integral in notch problems'
    Submitted to J. Mech. Phys. Solids, Oct. 2000. Also CUED technical report, CUED/C-MICROMECH/TR.38, 2000. Abstract
  12. Lu, TJ, Hutchinson, JW, Evans, AG. 'Optimal design of a flexural actuator'
    CUED technical report, CUED/C-MICROMECH/TR.39, 2000. Abstract
  13. Lu, TJ, Evans, AG. 'Design of a high authority flexural actuator using an electrostrictive polymer'
    CUED technical report, CUED/C-MICROMECH/TR.40, 2000. Abstract
  14. Gu, S, Lu, TJ, Hass, DD, Wadley, HNG. 'Thermal conductivity of zirconia coatings with zig-zag pore microstructures'
    CUED technical report, CUED/C-MICROMECH/TR.41, 2000. Abstract

1999

  1. Harte, A-M, Fleck, NA, Ashby, MF. 'Fatigue failure of an open cell and a closed cell aluminium alloy foam'
    Acta Materialia, 47(8), p 2511-2524, 1999.
    Also CUED technical report, CUED/C-MICROMECH/TR.5, 1998. Abstract
  2. McCullough, KYG, Fleck, NA, Ashby, MF. 'Uniaxial stress-strain behaviour of aluminium alloy foams'
    Acta Materialia, 47(8), p 2323-2330, 1999. Also CUED technical report, CUED/C-MICROMECH/TR.10, 1998. Abstract
  3. Lu, TJ. 'Heat transfer efficiency of metal honeycombs'
    Int. J. Heat & Mass Transfer, 42(11), p 2031-2040, 1999. Also CUED technical report, CUED/C-MICROMECH/TR.12, 1998. Abstract
  4. Lu, TJ, Chen, C. 'Thermal transport and fire retardance properties of cellular aluminium alloys'
    Acta Materialia, 47(5), p 1469-1485, 1999. Also CUED technical report, CUED/C-MICROMECH/TR.15, 1998. Abstract
  5. Chen, C, Lu, TJ. 'A phenomenological framework of constitutive modelling for incompressible and compressible elasto-plastic solids'
    submitted to Int. J. Solids and Structures, February 1999. Also CUED technical report CUED/C-MICROMECH/TR.16, 1999. Abstract
  6. McCullough, KYG, Fleck, NA, Ashby, MF. 'Toughness of aluminium alloy foams'
    Acta Materialia, 47(8), p 2331-2343, 1999.
    Also CUED technical report, CUED/C-MICROMECH/TR.17, 1999. Abstract
  7. Chen C. 'Updated manual for a UMAT subroutine'
    CUED technical report, CUED/C-MICROMECH/TR.20, 1999. Abstract
  8. Zhao LG, Lu TJ, Fleck NA. 'The channelling and spalling of cracks under cold shock'
    Submitted to J. Mech. Phys. Solids, May 1999. Also CUED technical report, CUED/C-MICROMECH/TR.21, 1999. Abstract
  9. Mesarovic S. 'Finite element implementation of the micromechanics based constitutive model for Stage I compaction of composite powders'
    CUED technical report, CUED/C-MICROMECH/TR.22, 1999. Abstract
  10. He P, Lu TJ. 'The cracking or zirconia refractory tubes under hot shock'
    Submitted to J. Mat. Sci., May 1999. Also CUED technical report, CUED/C-MICROMECH/TR.23, 1999. Abstract
  11. McCullough, KYG, Fleck, NA, Ashby, MF. 'The stress-life fatigue behaviour of aluminium alloy foams'
    submitted to Fatigue & Fracture of Eng. Mats. Structures, May 1999. Also CUED technical report, CUED/C-MICROMECH/TR.24, 1999. Abstract
  12. Olurin OB, Fleck NA, Ashby, MF. 'Joining of aluminium alloy foams with fasteners and adhesives'
    Journal of Materials Science, 35(5), p 1079-1085, 2000. Also CUED technical report, CUED/C-MICROMECH/TR.25(rev. of TR.19), 1999. Abstract
  13. Lu, TJ. 'Thermal management of high power electronics with phase change cooling'
    Int. J. Heat & Mass Transfer, 43(13), p 2245-2256, 2000. Also CUED technical report, CUED/C-MICROMECH/TR.26, 1999. Abstract
  14. Chen C, Lu TJ, Fleck NA. 'Effect of inclusions and holes on the stiffness and strength of 2D cellular solids'
    CUED technical report, CUED/C-MICROMECH/TR.27, 1999. Abstract
  15. Lu TJ, Chen C, He, D. 'Sound absorption of cellular metals with semi-open cells'
    Submitted to J. Acoust. Soc. Am., Aug. 1999. Also CUED technical report, CUED/C-MICROMECH/TR.28, 1999. Abstract
  16. Liu D, Fleck NA. 'User's manual II for finite element code flash for fibre microbuckling'
    CUED technical report, CUED/C-MICROMECH/TR.29, 1999. Abstract
  17. Chen, C, Fleck, NA, Lu, TJ. 'The mode I crack growth resistance of metallic foams'
    submitted to J. Mech. Phys. Solids, Dec. 1999. Also CUED technical report, CUED/C-MICROMECH/TR.30, 1999. Abstract
  18. Sutcliffe MPF, Xin XJ, Fleck NA, Curtis PT. 'Composite compressive strength modeller, version 1.4, 1999'
    CUED technical report, CUED/C-MICROMECH/TR.35, 1999. Abstract

1998

  1. Ashby MF, Evans AG, Hutchinson JW, Fleck NA. 'Metal foams: a design guide'
    CUED technical report, CUED/C-MICROMECH/TR.3, version 4, Aug. 1998. Abstract
  2. Chen C. 'Manual for a UMAT user subroutine'
    CUED technical report, CUED/C-MICROMECH/TR.4, 1998. Abstract
  3. Harte, A-M, Fleck, NA, Ashby, MF. 'Fatigue failure of an open cell and a closed cell aluminium alloy foam'
    Acta Materialia, 47(8), p 2511-2524, 1999.
    Also CUED technical report, CUED/C-MICROMECH/TR.5, 1998. Abstract
  4. Deshpande, VS, Fleck, NA. 'High strain rate compressive behaviour of aluminium alloy foams'
    International Journal of Impact Engineering, 24(3), p 277-298, 2000. Also CUED technical report, CUED/C-MICROMECH/TR.6, 1998. Abstract
  5. Ashby, MF, Cocks, ACF, Gibson, LJ. 'The creep of cellular solids'
    CUED technical report, CUED/C-MICROMECH/TR.7, 1998.
    Abstract
  6. Chen C, Lu, TJ, Fleck NA. 'Effect of imperfections on the yielding of two-dimensional foams'
    Submitted to J. Mech. Phys. Solids, 1998. Also CUED technical report, CUED/C-MICROMECH/TR.8, 1998. Abstract
  7. Deshpande, VS, Fleck, NA. 'Isotropic constitutive models for metallic foams'
    Journal of the Mechanics and Physics of Solids, 48(6), p 1253-1283, 2000. Also CUED technical report, CUED/C-MICROMECH/TR.9, 1998. Abstract
  8. McCullough, KYG, Fleck, NA, Ashby, MF. 'Uniaxial stress-strain behaviour of aluminium alloy foams'
    Acta Materialia, 47(8), p 2323-2330, 1999. Also CUED technical report, CUED/C-MICROMECH/TR.10, 1998. Abstract
  9. Lu TJ, Hess A, Ashby MF. 'Sound absorption in Metallic foams'
    CUED technical report, CUED/C-MICROMECH/TR.11, 1998. Abstract
  10. Lu, TJ. 'Heat transfer efficiency of metal honeycombs'
    Int. J. Heat & Mass Transfer, 42(11), p 2031-2040, 1999. Also CUED technical report, CUED/C-MICROMECH/TR.12, 1998. Abstract
  11. Lu, TJ, Stone, HA, Ashby, MF. 'Heat transfer in open-cell foams'
    Acta Materialia, 46(10), p 3619-3635, 1998.
    Also CUED technical report, CUED/C-MICROMECH/TR.13, 1997. Abstract
  12. Wang X, Lu TJ. 'Optimised acoustic properties of cellular solids'
    Submitted to Optimisation of Cellular Solids, Dec. 1998. Also CUED technical report, CUED/C-MICROMECH/TR.14, 1998. Abstract
  13. Lu, TJ, Chen, C. 'Thermal transport and fire retardance properties of cellular aluminium alloys'
    Acta Materialia, 47(5), p 1469-1485, 1999. Also CUED technical report, CUED/C-MICROMECH/TR.15, 1998. Abstract
  14. Lu TJ, Fleck NA. 'The thermal shock resistance of solids'
    Acta Materialia, 46(13), pp 4755-4768, 1998. Also CUED technical report, CUED/C-MICROMECH/TR.18, 1998. Abstract

1997

  1. Murphy AM, Ashby MF, Fleck NA. 'Metallography and image analysis of metallic foams'
    CUED technical report, CUED/C-MICROMECH/TR.1, 1997. Abstract
  2. Grenestedt, J. 'Crushing of honeycombs'
    CUED technical report, CUED/C-MICROMECH/TR.2, 1997. Abstract
  3. Lu, TJ, Stone, HA, Ashby, MF. 'Heat transfer in open-cell foams'
    Acta Materialia, 46(10), p 3619-3635, 1998.
    Also CUED technical report, CUED/C-MICROMECH/TR.13, 1997. Abstract
© 2005 Cambridge University Engineering Department (CUED)
Information provided by www-mech