Search Contact information
University of Cambridge Home Department of Engineering
University of Cambridge > Engineering Department > Faculty & Staff

Dr Vikram S Deshpande

Publications


| Journals | Conference Papers | Other Publications |

Refereed journal papers

  1. V. S. Deshpande and D. Cebon (1999), Models for a particle reinforced non-linear viscous composite, Journal of Engineering Mechanics, ASCE, 125(3): 255-262.
  2. V. S. Deshpande and D. Cebon (1999), Steady-state constitutive relationship for idealised bituminous mixes, Mechanics of Materials, 31:271-287.
  3. V. S. Deshpande and D. Cebon (2000), Uniaxial compressive behaviour of idealised bituminous mixes, Journal of Materials in Civil Engineering, ASCE, 12(3):262-271.
  4. V. S. Deshpande and N. A. Fleck (2000), High strain-rate compressive behaviour of aluminium alloy foams, International Journal of Impact Engineering, 24(3):277-298.
  5. V. S. Deshpande and N. A. Fleck (2000), Isotropic constitutive models for metallic foams, Journal of the Mechanics and Physics of Solids, 48(6-7):1253-1283.
  6. V. S. Deshpande, N. A. Fleck and M. F. Ashby (2001), Effective properties of an octet truss lattice material, Journal of the Mechanics and Physics of Solids, 49(8):1747-1769.
  7. V. S. Deshpande and N. A. Fleck (2001), Multi-axial yield behaviour of polymer foams, Acta Materialia, 49(10): 1859-1866.
  8. V. S. Deshpande, M. F. Ashby and N. A. Fleck (2001), Foam topology: bending versus stretching dominated architectures, Acta Materialia, 49(6):1035-1040.
  9. V. S. Deshpande and N. A. Fleck (2001), Collapse of truss core sandwich beams in 3-point bending, International Journal of Solids and Structures, 38(36-37):6275-6305.
  10. E. Van der Giessen, V. S. Deshpande, H. H. M. Cleveringa and A. Needleman (2001), Discrete dislocation plasticity and crack tip fields in single crystals, Journal of the Mechanics and Physics of Solids, 49(9):2133-2153.
  11. V. S. Deshpande, A. Needleman and E. Van der Giessen (2001), A discrete dislocation analysis of near-threshold fatigue crack growth, Acta Materialia, 49(16):3189-3203.
  12. V. S. Deshpande, A. Needleman and E. Van der Giessen (2001), Dislocation dynamics is chaotic, Scripta Materialia, 45(9):1047-1053.
  13. V. S. Deshpande, A. Needleman and E. Van der Giessen (2001), A discrete dislocation analysis of fatigue crack growth, Journal de Physique IV, 5:69-75.
  14. V. S. Deshpande, A. Needleman and E. Van der Giessen (2002), Discrete dislocation modelling of fatigue crack growth, Acta Materialia, 50(4):831-846.
  15. V. S. Deshpande and N. A. Fleck (2003), Energy absorption of an Egg-box material, Journal of the Mechanics and Physics of Solids, 51(1):187-208.
  16. V. S. Deshpande, A. Needleman and E. Van der Giessen (2003), Discrete dislocation modelling of short crack in single crystals, Acta Materialia, 51(1): 1-15.
  17. Q. Chen, V. S. Deshpande, E. Van der Giessen, and A. Needleman (2003), Friction stress effects on Mode I crack growth predictions, Scripta Materialia, 48(6): 755-759.
  18. V. S. Deshpande, A. Needleman and E. Van der Giessen (2003), A finite strain formulation of discrete dislocation plasticity, Journal of the Mechanics and Physics of Solids, 51: 2057-2083.
  19. V. S. Deshpande, A. Needleman and E. Van der Giessen (2003), Scaling of discrete dislocation plasticity predictions for near-threshold fatigue crack growth, Acta Materialia, 51: 4637-4651.
  20. X. Qiu, V. S. Deshpande and N. A. Fleck (2003), Finite element analysis of the dynamic response of clamped sandwich beams subject to shock loading, European Journal of Mechanics A/Solids, 22: 801-814.
  21. V. S. Deshpande and D. Cebon (2004), Micro-mechanical modelling of steady-state deformation in asphalt, Journal of Materials in Civil Engineering, ASCE, 16(2): 100-106.
  22. N.A. Fleck and V.S. Deshpande (2004) The resistance of clamped beams to shock loading, Journal of Applied Mechanics, 71(3), 386-401.
  23. V.L. Tagarielli, N.A. Fleck and V.S. Deshpande (2004), Collapse of clamped and simply supported composite sandwich beams in three-point bending, Journal of Composites - Part B, 35, 523-534.
  24. M. Zupan, V.S Deshpande and N.A. Fleck (2004), The out-of-plane compressive behaviour of woven-core sandwich plates, European Journal Mechanics A/Solids, 23(3), 411-421.
  25. F. Cote, V.S. Deshpande, N.A. Fleck and A.G. Evans (2004), The out-of-plane compressive behaviour of metallic honeycombs, Materials Science and Engineering A, 380, 272-280.
  26. X. Qiu, V.S. Deshpande and N.A. Fleck (2004), Dynamic response of a clamped circular sandwich plate to shock loading, Journal of Applied Mechanics, 71(5), 637-645.
  27. S. Bergounioux, E.A. Ossa, V.S. Deshpande and D. Cebon (2004), Monotonic and cyclic behaviour of polymer-modified bitumens, International Journal of Road Materials and Pavement Design, Vol 5 - Special Issue, 25-44.
  28. V.S. Deshpande, A. Needleman and E. Van der Giessen (2004), Discrete dislocation plasticity analysis of static friction, Acta Materialia, 52(10), 3135-3149.
  29. G.W Kooistra, V.S. Deshpande and H.N.G. Wadley (2004), Compressive behaviour of age hardenable tetrahedral lattice truss structures made from aluminium, Acta Materialia, 52, 4229-4237.
  30. V.L. Tagarielli, N.A. Fleck, V.S. Deshpande (2004), The collapse response of sandwich beams with aluminium face sheets and a metal foam core. Advanced Engineering Materials, 6(6), 440-443.
  31. E.A. Ossa, V.S. Deshpande and D. Cebon (2005), A phenomenological model for the monotonic and cyclic behaviour of pure bitumen, Journal of Materials in Civil Engineering, ASCE, 17(2), 188-197.
  32. V.S. Deshpande, A. Needleman and E. Van der Giessen (2005), Reply to "Comment on Dislocation dynamics is chaotic", Scripta Materialia. 52(5), 429-431.
  33. X. Qui, V.S. Deshpande and N.A. Fleck (2005), Impulsive loading of sandwich and monolithic beams over a central patch, Journal of the Mechanics and Physics of Solids, 53(5), 1015-1046.
  34. V.S. Deshpande and N.A. Fleck (2005), One-dimensional shock response of sandwich beams, Journal of the Mechanics and Physics of Solids, 53(11), 2347-2383.
  35. E.A. Ossa, V.S. Deshpande and D. Cebon (2005), Spherical indentation response of bitumen, Acta Materialia, 53(11), 3103-3113.
  36. V.L. Tagarielli, V.S. Deshpande, N.A. Fleck and C.Chen (2005), A constitutive model for transversely isotropic foams, and its application to the indentation of balsa wood, International Journal of Mechanical Sciences, 47(4-5), 666-686.
  37. N.A. Fleck and V.S. Deshpande (2005), Closure to discussion of the Resistance of Clamped Sandwich Beams to Shock Loading, Journal of Applied Mechanics, 72(6), 979-980.
  38. V.S. Deshpande, A. Needleman, E. Van der Giessen (2005), Size dependence of energy storage and dissipation in a discrete dislocation plasticity analysis of static friction, Materials Science and Engineering A, 400-401, 393-396.
  39. V.S. Deshpande, A. Needleman, E. Van der Giessen (2005), Discrete dislocation plasticity analysis of single slip tension, Materials Science and Engineering A, 400, 154-157.
  40. D.S. Balint, V.S. Deshpande, A. Needleman, E. Van der Giessen (2005), A discrete dislocation plasticity analysis of grain-size strengthening, Materials Science and Engineering A, 400,186-190.
  41. D.S. Balint, V.S. Deshpande, A. Needleman and E. Van der Giessen (2005), Discrete dislocation plasticity analysis of crack-tip fields in polycrystalline materials, Philosophical Magazine, 85(26-27), 3047-3071.
  42. V.S. Deshpande, A. Needleman and E. Van der Giessen (2005), Plasticity size effects in tension and compression of single crystals , Journal of the Mechanics and Physics of Solids, 53(12), 2661-2691.
  43. D.D. Radford, V.S. Deshpande and N.A. Fleck (2005), The use of metal foam projectiles to simulate shock loading on a structure, International Journal of Impact Engineering, 31(9), 1152-1171.
  44. D.D. Radford, N.A. Fleck and V.S. Deshpande (2006), The response of clamped sandwich beams subjected to shock loading, International Journal of Impact Engineering, 32(6), 968-987.
  45. C.B.W. Pedersen, V.S. Deshpande and N.A. Fleck (2006), Compressive response of the Y-shaped sandwich core, European Journal of Mechanics A/Solids, 25(1): 125-141.
  46. H.J. Rathbun, D.D. Radford, Z. Xue, M.Y. He, J. Yang, V.S. Deshpande, N.A. Fleck, J.W. Hutchinson, F.W. Zok, A. G. Evans (2006), Performance of metallic honeycomb-core sandwich beams under shock loading, International Journal of Solids and Structures, 43(6), 1746-1763.
  47. D.D. Radford, G.J. McShane, V.S. Deshpande and N.A. Fleck (2006), The dynamic response of clamped metal foam sandwich plates, International Journal of Solids and Structures, 43(7-8), 2243-2259.
  48. F. Cote, V.S. Deshpande, N.A. Fleck and A.G. Evans (2006), The compressive and shear responses of the corrugated and diamond core lattice materials, International Journal of Solids and Structures, 43(20), 6220-6242.
  49. V.S. Deshpande, A. Heaver and N.A. Fleck (2006) An underwater shock simulator, Proceedings of the Royal Society of London, Series A, 462, 1021-1041.
  50. A. Needleman, E. Van der Giessen, and V.S. Deshpande (2006), Statistical aspects of discrete dislocation plasticity, Scripta Materialia, 54(5), 729-733.
  51. D.S. Balint, V.S. Deshpande, A. Needleman and E. Van der Giessen (2006), Size effects in uniaxial deformation of single and polycrystals: a discrete dislocation plasticity analysis, Modelling and Simulation in Materials Science and Engineering, 14(3), 409-422.
  52. D.S. Balint, V.S. Deshpande, A. Needleman and E. Van der Giessen (2006), Discrete dislocation plasticity analysis of the wedge indentation of films, Journal of the Mechanics and Physics of Solids, 54(11), 2281-2303.
  53. M.T. Tilbrook, V.S Deshpande and N.A. Fleck (2006), The impulsive response of sandwich beams: Analytical and numerical investigation of the regimes of behaviour, Journal of the Mechanics and Physics of Solids, 54(11), 2242-2280.
  54. V.S. Deshpande, R.M. McMeeking and A.G. Evans (2006), A bio-chemo-mechanical model for cell contractility, Proceedings of the National Academy of Sciences, USA, 103(38), 14015-14020.
  55. F. Cote, V.S. Deshpande and N.A. Fleck (2006), The shear response of metallic square-honeycombs, Journal of the Mechanics of Materials and Structures, 1, 1281-1300.
  56. G.J. McShane, D.D. Radford, V.S. Deshpande and N.A. Fleck (2006), The response of clamped sandwich plates with lattice cores subjected to shock loading, European Journal of Mechanics A/Solids, 25, 215-229.
  57. V.S. Deshpande, R.M. McMeeking and A.G. Evans (2007), A model for the contractility of the cytoskeleton including the effects of stress fiber formation and dissociation, Proceedings of the Royal Society, Series A, 463, 787-815.
  58. A. Needleman, E. Van der Giessen, and V.S. Deshpande (2007), Discrete Dislocation Modeling of Plastic Flow Processes, Key Engineering Materials, 340, 31-38.
  59. V.L. Tagarielli, V.S. Deshpande and N.A. Fleck (2007), The dynamic response of composite sandwich beams to transverse impact, International Journal of Solids and Structures, 44, 2442-2457.
  60. F. Cote, R. Biagi, H. Bart-Smith and V.S. Deshpande (2007), Structural response of pyramidal core sandwich columns, International Journal of Solids and Structures, 44, 3533-3556.
  61. V.S. Deshpande, D.S. Balint, A. Needleman and E. Van der Giessen (2007), Discrete dislocation plasticity analysis of the frictional sliding in single asperity contact, Modelling and Simulation in Materials Science and Engineering, 15, S97-S108.
  62. F. Cote, V.S. Deshpande and N.A. Fleck, (2007), Shear fatigue strength of a prismatic diamond sandwich core, Scripta Materialia, 56, 585-588.
  63. V.L. Tagarielli, V.S. Deshpande and N.A. Fleck (2007), The high strain rate response of PVC foams and end-grain balsa wood, Composites- Part B, doi:10.1016/j.compositesb.2007.02.005.
  64. A. Widjaja, E. Van der Giessen, V.S. Deshpande and A. Needleman (2007), Contact area and size effects in discrete dislocation modeling of wedge indentation, Journal of Materials Research, 22, 655-663.
  65. G.W. Kooistra, V.S. Deshpande and H.N.G. Wadley (2007), Hierarchical corrugated core sandwich panel concepts, Journal of Applied Mechanics, 74, 259-268.
  66. G.J. McShane, V.S. Deshpande and N.A. Fleck (2007), The underwater blast resistance of metallic sandwich beams with prismatic lattice cores, Journal of Applied Mechanics, 74, 352-364.
  67. M.T. Tilbrook, D.D. Radford, V.S. Deshpande and N.A. Fleck (2007), The dynamic compressive response of the Y-frame and corrugated sandwich core, International Journal of Solids and Structures, 44, 6101-6123.
  68. F. Cote, N.A. Fleck and V.S. Deshpande (2007), Fatigue performance of sandwich beams with a pyramidal core, International Journal of Fatigue, 29, 1402-1412.
  69. G.J. McShane, D.D. Radford, V.S. Deshpande and N.A. Fleck (2007), The dynamic compressive response of square-honeycombs, Journal of Applied Mechanics, 74, 658-667.
  70. A. Vaziri, A. Gopinath and V.S. Deshpande (2007), Continuum-Based Computational Methods in Cell and Nuclear Mechanics, Journal of the Mechanics of Materials and Structures, 2, 1169-1192.
  71. D.T. Queheillalt, V.S. Deshpande and H.N.G. Wadley (2007), Waviness effects in diamond and square oriented metallic cellular sandwich cores, Journal of the Mechanics of Materials and Structures, 2, 1657-1670.
  72. M.I. Hussein, U. Borg, C.F. Niordson, and V.S. Deshpande (2008), Plasticity size effects in voided crystals, Journal of the Mechanics and Physics of Solids, 56, 114-131.
  73. V. Rubino, V.S Deshpande and N.A. Fleck (2008), The collapse response of sandwich beams with a Y-frame core subjected to local and distributed loading, International Journal of Mechanical Sciences, 50, 233-246.
  74. R.M. McMeeking, A.V. Spuskanyuk, M.Y. He, V.S. Deshpande, N.A. Fleck and A.G. Evans (2007), An analytical model for the response to water blast of unsupported sandwich panels, International Journal of Solids and Structures, 45, 478-496.
  75. C.J. Yungwirth, H.N.G. Wadley, A. Zakraysek and V.S. Deshpande (2007), Impact response of sandwich plates with a pyramidal lattice core, International Journal of Impact Engineering, doi:10.1016/j.ijimpeng.2007.07.001.
  76. D.S. Balint, V.S. Deshpande, A. Needleman and E. Van der Giessen (2007), Discrete dislocation plasticity analysis of the Hall-Petch effect, International Journal of Plasticity, doi:10.1016/j.ijplas.2007.08.005.
  77. V.S. Deshpande, M. Mrksich, R.M. McMeeking and A.G. Evans (2007), A bio-mechanical model for coupling cell contractility with focal adhesion formation, Journal of the Mechanics and Physics of Solids, doi:10.1016/j.jmps.2007.08.006.
  78. A. Pathak, V.S. Deshpande, R.M. McMeeking and A.G. Evans (2007), The simulation of stress fibre and focal adhesion development in cells on patterned substrates, Journal of the Royal Society Interface, doi:10.1098/rsif.2007.1182.
  79. S. Kazemahvazi, D.D. Radford, V.S. Deshpande and N.A. Fleck, (2007), Dynamic failure of clamped circular plates subjected to an underwater shock, Journal of the Mechanics of Materials and Structures, 2, 2007-2024.
  80. Z. Wei, V.S. Deshpande, A.G. Evans, K.P. Dharmasena, H.N.G. Wadley, P. Dudt and K. Kiddy (2007), The resistance of metallic sandwich panels to localized underwater blast, Journal of the Mechanics and Physics of Solids, doi:10.1016/j.jmps.2007.10.010.
  81. V. Rubino, V.S Deshpande and N.A. Fleck (2007), The dynamic response of clamped Y-frame and corrugated core sandwich beams, International Journal of Impact Engineering, doi:10.1016/j.ijimpeng.2007.10.006.
  82. K. Finnegan, G. Kooistra, H.N.G. Wadley and V.S. Deshpande (2007), The compressive response of carbon fiber composite pyramidal truss sandwich cores, International Journal of Materials, 1264-1272.
  83. V. Rubino, V.S Deshpande and N.A. Fleck (2007), The dynamic response of end-clamped sandwich beams with Y-frame and corrugated cores, International Journal of Impact Engineering, doi:10.1016/j.ijimpeng.2007.10.006.
  84. G.J. McShane, C. Stewart, M.T. Aronson, H.N.G. Wadley, N.A. Fleck and V.S. Deshpande (2008), Dynamic rupture of polymer-metal bilayer plates, International Journal of Solids and Structures, doi:10.1016/j.ijsolstr.2008.03.017.
  85. Z. Wei, V.S. Deshpande, R.M. McMeeking and A.G. Evans (2008), Analysis and interpretation of stress fiber organization in cells subject to cyclic stretch, ASME Journal of Biomechanical Engineering, doi:10.1115/1.2907745.

    86. Journal articles (to appear)

  86. E.A. Ossa, V.S. Deshpande and D. Cebon (2006), Triaxial response of bituminous mixes, to appear in Journal of Materials in Civil Engineering, ASCE.
  87. A.V. Spuskanyuk, R.M. McMeeking, V.S. Deshpande and E. Arzt, The Effect of Shape on the Adhesion of Fibrillar Surfaces, to appear in Acta Biomaterialia.

    88. Journal articles (submitted)

  88. M.T. Tilbrook, V.S. Deshpande and N.A. Fleck (2007), Underwater blast loading of sandwich structures: regimes of behaviour, submitted to International Journal of Solids and Structures.
  89. F. Cote, V.S. Deshpande and N.A. Fleck (2007), The through thickness compressive strength of a composite sandwich panel with a hierarchical square-honeycomb sandwich core, submitted to Journal of Applied Mechanics.
  90. V. Rubino, V.S Deshpande and N.A. Fleck (2007), The dynamic response of clamped Y-frame and corrugated core sandwich plates, submitted to European Journal of Mechanics A:/Solids.
  91. V. Rubino, V.S Deshpande and N.A. Fleck (2007), The three-point bending of Y-frame sandwich beams, submitted to International Journal of Mechanical Sciences.
  92. V.S. Deshpande and A.G. Evans (2007), Inelastic deformation and energy dissipation in ceramics: A mechanism-based dynamic constitutive model, submitted to Journal of the Mechanics and Physics of Solids.
  93. B.P. Russell, V.S. Deshpande and H.N.G. Wadley (2008), Quasi-static compressive and shear response of composite square honeycombs, submitted to Journal of the Mechanics of Materials and Structures.
  94. Z. Wei, V.S. Deshpande and A.G. Evans (2008). Mechanisms and Mechanics Governing the Indentation of Polycrystalline, submitted to Journal of the American Ceramic Society.
  95. Z. Wei, A.G. Evans and V.S. Deshpande (2008). Simulation of the dynamic penetration of alumina by hard spheres, submitted to Journal of Applied Mechanics.
  96. M.I. Hussein, V.S. Deshpande and A. Needleman (2008), Size effects in particle reinforced metal matrix composites: a discrete dislocation plasticity analysis, submitted to International Journal of Plasticity.
  97. P. McGarry, V.S. Deshpande, C. Chen, R.M. McMeeking and A.G. Evans (2008), Modelling of the response of cells on a bed of micro-needles, submitted to Journal of the Royal Society Interface.
  98. K.P. Dharmasena, D.T. Queheillalt, H.N.G. Wadley, P. Dudt, Y. Chen, D. Knight, A.G. Evans and V.S. Deshpande (2008), Dynamic compression of metallic sandwich structures during planar impulsive loading in water, submitted to European Journal of Mechanics A/Solids.
  99. V.L. Tagarielli, V.S. Deshpande and N.A. Fleck (2008), Prediction of the dynamic response of composite sandwich beams under shock loading, submitted to International Journal of Solids and Structures.
  100. E. Ferri, V.S. Deshpande and A.G. Evans (2008), The dynamic strength of a double layer prismatic core, submitted to International Journal of Impact Engineering.
  101. V.S. Deshpande and R.M. McMeeking (2008), A kinetic-theory for the dynamic response of loose sands, submitted to Journal of the Mechanics and Physics of Solids.

Books and book chapters

  1. V. S. Deshpande, A. Needleman and E. Van der Giessen (2006), Discrete dislocation modelling of contact and friction, in Dislocations , ed. J. P. Hirth and Nabarro.

Conference papers

  1. Deshpande, V.S. and Fleck, N.A. (1999). Multi-axial yield of aluminium alloy foams, in Proceedings of Metfoam '99, Fraunhofer Institute, Bremen, Germany.
  2. Deshpande, V.S., Needleman, A. and Van der Giessen, E. (2001). A discrete dislocation analysis of crack growth. Proceedings of International Conference on Fracture 10, Hawaii, USA.
  3. V. S. Deshpande, E. Van der Giessen and A. Needleman (2002), Discrete dislocation modeling of edge cracks in single crystals. Proceedings of the 8th Internationnal Conference of Fatigue, Stockholm, Sweden.
  4. A. Needleman, E. Van der Giessen and V. S. Deshpande (2002), Discrete dislocation modeling of fatigue crack growth. Proceedings of the 8th Internationnal Conference of Fatigue, Stockholm, Sweden.
  5. N. A. Fleck, M.F. Ashby and V. S. Deshpande (2002), The Topology of Cellular Materials, in "New Approaches to Structural Mechanics, Shells and Biological Structures", Eds. Horace Drew and Sergio Pellegrino, Cambridge.
  6. A. Needleman, E. Van der Giessen and V. S. Deshpande (2002), Discrete dislocation modeling of fatigue crack growth. TMS proceedings, Symposium in honour of J.F. Knott.
  7. V. S. Deshpande and N. A. Fleck (2003), Blast Resistance of Sandwich Beams. 6th Int. Conference on Sandwich Structures, Ft. Lauderdale, Florida, USA.
  8. V. L. Tagarielli, N. A. Fleck and V. S. Deshpande (2003), The collapse response of sandwich beams with aluminium face sheets and a metal foam core in three-point bending. Metfoam 2003, Berlin, Germany.
  9. V. S. Deshpande, A. Needleman and E. van der Giessen (2003), Discrete Dislocation predictions of single crystal fatigue crack growth. International Union of Theoretical and Applied Mechanics, Osaka, Japan.
  10. J. Gullickson, V. S. Deshpande, A. Needleman and E. Van der Giessen Discrete Dislocation modelling of crack growth, 2004, 3rd. Int. Conf. on Computational modelling and simulation of materials, Sicily, Italy.
  11. V. S. Deshpande, A. Needleman and E. Van der Giessen (2005). Modelling fatigue crack growth in crystalline solids with discrete dislocation plasticity. Int. Conf. Fracture, Turin, Italy, March 2005.
  12. V. S. Deshpande, A. Needleman and E. Van der Giessen (2005). Discrete dislocation plasticity analysis of size effects in single crystals, Computational plasticity, Barcelona, Spain
  13. G. J. McShane, V. S. Deshpande and N. A. Fleck (2005), An assessment of the blast resistance of sandwich beams, Computational plasticity, Barcelona, Spain
  14. B.P. Russell, V.S. Deshpande and N.A. Fleck, (2007), Quasi-static compression of carbon fibre square honeycombs, International Conference on Experimental Mechanics, Alexandroupolis, Greece.
  15. M.I. Hussein, and V.S. Deshpande (2008), A discrete dislocation plasticity study of size effects in porous and composite materials, 9th Cairo University International Conference on Mechanical Design and Production, Cairo, Egypt.

Other publications

  1. Deshpande, V.S. (1995). Deformation behaviour of idealised bituminous mixes, MPhil thesis, Cambridge University.
  2. Deshpande, V.S. (1998). Steady-state deformation behaviour of bituminous mixes, PhD thesis, Cambridge University.
| Journals | Conference Papers | Other Publications |
Last updated 19 May. 2008